How to fix carpet burns? If you’re searching for “how to fix a carpet burn,” chances are, you dropped a hot cigarette or iron on it. Whatever happened, you want the simplest solution so you can get on with life as soon as possible. If you are panicking, stop, because with a little effort, you can fix a small carpet burn.
Can carpet burns be repaired?
Carpet burns can be unsightly and can detract from the appearance of your home. However, the good news is that in many cases, they can be repaired. The exact method of repair will depend on the extent of the damage and the type of carpet you have.
For small burns, a patch can often be cut from a remnant of the same carpet and then glued in place. For larger burns, the damaged area may need to be cut out and replaced with a new section of carpet.
In some cases, a professional carpet repair technician may be able to use specialized tools and techniques to repair the burn without the need for a patch or replacement. It’s important to address carpet burns as soon as possible to prevent them from getting worse and to ensure the repair is as seamless as possible.
Invest in our premium carpet cleaning services for all your carpeted areas. You will not be disappointed.
With a little DIY, it’s possible to fix the carpet burn yourself. Below you’ll find the steps involved to repair carpet burns using 3 different methods. Here’s how:
What to do if the carpet burn is small
What most people don’t realize when they attempt to fix a carpet burn is that size matters. You can fix a smaller burn much easily than a larger one. Here’s how:
You will need:
- Scissors
- Sandpaper
- Carpet adhesive
- Superglue or fabric glue
- Wide tooth comb
- Vacuum
- Utility knife
Method 1: Scissors and Sandpaper
Step 1: If only the tips of your carpet are charred, you can go ahead and snip them off with a pair of scissors. Assuming you don’t have scissors nearby, you can still get rid of the charring by rubbing the damaged part with some sandpaper, but you have to get rid of any residues using a vacuum.
Step 2: Once you’ve done this, dab the affected part with a detergent using a sponge.
Step 3: Go ahead and remove the soap with a clean, wet sponge. Once this part of the carpet dries up, it will look as good as new and no one will be able to tell that it was charred.
Method 2: Cut and Replace Fibers
Here’s a different way of getting rid of small burns on your carpet and a youtube video so you can see exactly how to do it:
Step 1: Make sure the scissors are sharp and cut out the burnt carpet fibers.
Step 2: You will have to replace these fibers so cut off some from a hidden part of your carpet.
Step 3: Next, apply a drop of superglue to the patch you cut off and then place the new fibers.
Step 4: Give the glue some time to dry, and then trim the fibers so they’re even with the rest of the carpet.
Step 5: Once you’ve trimmed the fibers, go ahead and give the carpet a little brush with your wide tooth comb.
Consider adding on a fabric and fiber protection package when you get your carpets cleaned. This additional service will save you time and money in the long run.
Method 3: Cut and Remove Carpet and Backing
Repairing carpet burns can be a bit daunting for larger burns across an area, but with the following steps, you can achieve satisfactory results:
Step 1: Begin by thoroughly vacuuming the affected area to remove any dirt and debris.
Step 2: Use a utility knife to cut away the burnt patch of carpet in a rectangular or square shape. Make sure you don’t cut too far into the carpet, only the backing, and not the base padding.
Step 3: Cut a clean piece of carpet from an inconspicuous location for replacement. If you can’t, obtain a matching carpet scrap from a professional carpet service or interior supplier. Lowe’s has many colors and types of carpet squares available for sale. Ensure they cut the replacement to the right size, allowing at least 2mm extra on all sides.
Step 4: Match up the replacement piece with the cutaway patch, ensuring the texture of the fabric is in the same direction. Trim the edges to achieve the right size.
Step 5: Remove the replacement carpet and vacuum the cutaway patch again to remove any dirt and debris.
Step 6: Apply carpet adhesive to the padding in the cutaway space and position the new carpet over it. Press it down firmly into place.
Step 7: Cover the area with paper and place a heavy book on top to allow the adhesive to dry.
Step 8: Comb the repaired patch and the surrounding area until it blends in with the rest of the carpet.
If your carpet has been burnt by a candle and there is also wax stuck on your carpet, Bob Vila has a helpful article titled, “How to Remove Candle Wax from Any Surface.”
What to do if the burn is big
As mentioned earlier, if the burn is too big, don’t take matters into your hands. Repairing large carpet burns require a little more work and you should leave this to the professionals. A carpet repair expert will ensure that your carpet is fully restored without visible signs of prior damage as they will employ various tactics of ensuring your carpet looks as good as new.
Final Thoughts
Many day-to-day activities can leave a burn mark on your carpet. Some things you can do yourself, without need a carpet repair service. But, if you want an extra professional cleaning to go with it, let Ace Carpet Cleaning know 🙂
Treating a burn mark on carpet is very different from treating a stain. A little more work is needed to get the carpet in better shape. So, whether you need to know how to get straightener burns out of carpet, incense or candle burns, or a full-on iron burn, don’t despair. With these methods, you can improve, disguise or maybe even remove the mark altogether.
